Forum Navigation
You need to log in to create posts and topics.
Protocols
#1 · 15 December 2023, 13h43
Hello, this is possible to know all the native protocols for communicating with CPU? OPC UA, Profine IRT, Modbus,...?
#2 · 21 December 2023, 16h19
Hello François,
Currently, the EklOr software manages a large part of National Instruments hardware (excluding RIO compacts).
However, compatibility tests are still being carried out.
And we're always looking to expand this list.
If you have any incompatibility concerns, you can always report it to our teams, through the forum.
Currently, communication between the EklOr software and a PLC is possible:
- either through a cifX card from Hilscher (recommended solution) (Profibus DP, Ethernet/IP, Profinet ...)
- either through a serial link (RS-485)
- either through a Modbus TCP link
We plan to work soon on the OPC UA protocol.